Red yellow green 8 inch 200mm LED traffic light
AC85-265V high brightness Red yellow green 8 inch 200mm LED traffic light
The basic parameters of the 200mm LED traffic light:
|Name||Red yellow green 8 inch 200mm LED traffic light|
|LED QTY||90pcs each color|
|LED luminous||RED :620-630nm ,green :505-510nm,yellow:590-594nm|
|Wave length||red /yellow:4000-5000mcd , green : 8000-10000mcd|
|Life span||3-5 years|
|visual angle||30 °C|
|LED type||Taiwan Epistar|
use for crossing road , high way ,turning road ,school ,parking area, foggy area etc
The characteristics of the 200mm red yellow green pc traffic light:
1.200mm red yellow green pc traffic light use Taiwan crystal chip lamp beads, high brightness,
high refresh rate, long service life.
2.200mm red yellow green pc traffic lighton the back of the design has a wire hole, which is not
only convenient for outlet, but also has a good waterproof effect.
3.200mm red yellow green pc traffic light is made of PC material, which has better waterproof
and dustproof effect and simple installation.
4.200mm red yellow green pc traffic light are installed with L-shaped brackets, which is very
convenient to assemble.
The physical map of the200mm red yellow green pc traffic light:
Fourth, the installation method of 200mm red yellow green pc traffic light:
Installation method: horizontal installation (1) A screw is left at both ends, and the nut above the screw is unscrewed.
(2) Place the “L” bracket, the flat end, on the screw according to the hole position and the slot,
and tighten the nut. (as the picture shows)
(3) The sun visor is installed on the upper part of the lamp. The visor is placed on the lamp and
screwed to the corresponding hole to tighten.
(4) Make 2 holes on the signal light rod, drill holes according to the hole position of the L bracket
of the signal, pass the light rod through the appropriate screw, and put the L-shaped bracket on
the screw and fix it with the nut. (as the picture shows)
Installation method: Horizontal or vertical installation
1. The visor is at the top of the lamp
2. The outlet hole is facing down (as shown):
5. Wiring method for 200mm red yellow green pc traffic light:
1.Voltage:DC12V/24V or AC85-265V
(1) red and black lines – red light negative;
(2) red line – positive electrode;
(3) Green line – green light negative;
(1) Black line – public zero line;
(2) Red line – red light line;
(3) Green line – green light line;
200mm red green PC traffic light accessories details:
(1) Lamps: 1 set (2) Visor: 2 (3) L-type bracket: 2 (4) Instruction manual: 1 copy (5) Certificate
of conformity: 1 part (6) M3 screw: 8
Application of 200mm red green pc traffic light
200mm red green pc traffic light packing:
If you are interested in our product,Please fell free to contact with us