First, the basic parameters of the 100mm toy traffic light:
Model: WDM-JD100-3-RYG Mainly used in parking lots, factories, schools, kindergartens, etc.
|Product Name||10 Years Factory Road Construction waterproof 100mm toy traffic light|
|Voltage||DC 12V or DC24V, AC85-265V|
|Color||RED yellow Green|
|Application||School teaching ,parking,crossing road|
|LED QTY||40pcs each color|
|LED viewing angle||30 degree|
Mini RED GREEN TRAFFIC LIGHT
1, for kindergartens, primary school traffic safety education,
2, to help children understand the traffic rules,Enhance children’s awareness of traffic safety.
3, according to the transformation of traffic lights, let the children develop compliance The habit of observing traffic rules
4, novel style, beautiful appearance
5. Easy to install, a wide range of uses.
High brightness bead
The product uses super bright Taiwan crystal chip light beads, the color is eye-catching and the color is distinct.
There is a mode switch on the bottom of the product (automatic AUTO/manual MANUAL) with a manual button on the top.
The bottom of the product has a charging socket with a charger for easy charging.
The base of the product has small holes for water injection or sand injection for stability.
Easy to assemble
Two bracket rods, one base and one mini energy lamp can be assembled and disassembled at will, very convenient.
Second, the characteristics of 100mm toy traffic light:
1. The 100mm toy traffic light are composed of a 100-type lamp with a self-opening
mold. The appearance is novel and the shape is unique.
2. The 100mm toy traffic light adopt Taiwanese wafer chip beads, which are bold in
color and distinct in color.
3. The bottom line of the 100 type red, yellow and green three lamps adopts waterproof
joints, and the protection grade reaches IP53.
4. The 100mm toy traffic light are installed with L-shaped brackets, which is very
convenient to assemble.
100mm toy traffic light installation instructions:
1. Bracket installation method:
(1) Align the hole position of the L-shaped bracket with the hole position of the side M12
(2) Insert the gasket into the stud of M12
(3) Pass the stud through the L-shaped bracket
(4) Finally, tighten the screws. (as the picture shows)
If you are interested in our product,Please fell free to contact with us